Search

(ὕαλος; hýalos or ὕελος; hýelos, vitrum) [German version] I. Methods of Glass Production Glass is a mixture of silicic acid (silicon dioxide, quartz or quartz sand) and alkali (soda, sodium bicarbonate or potash) as flux [2; 7; 8]. Since it was apparently unknown in antiquity that alkali makes the mixture water-soluble, only glass with sufficient lime to neutralize this reaction is preserved. Producers of raw glass (ὑελέψης; hyelépsēs or ὑαλοψός; hyalopsós) knew from experience which sand (ψάμμος ὑαλικός; psámmos hyalikós) or which calcareous plant ashes made the glass durable. Up i…

[German version] I. Near East The oldest examples of a developed sculptural technique in stone from the Ancient Near East are from the later 4th millennium BC (Uruk). The most important genres of monuments are free-standing sculpture and relief (stele, rock reliefs, orthostats, obelisks). The material was worked with metal tools and probably hard stone tools. Traces of tools are rarely preserved due to smoothing and polishing of the surface with abrasives. Surfaces could be shaped through the incisio…

[German version] A.1 Iron and Iron Ores Since iron does not naturally occur in usable concentrations, it must be obtained by smelting iron ores. Previously, meteorite iron was occasionally worked to make tools and weapons. Iron obtained by smelting is differentiated with certainty from meteorite iron by its nickel content: meteorite iron usually has more than 5% nickel (values up to 10% are normal) while iron extracted from ores usually has less than 0.5% nickel. Various types of naturally occurring ir…

[German version] I. Definition Tin is a metal, used in Antiquity for casting, for making sheet-metal, for plating other materials, for alloys, primarily with copper to make bronze or with lead to make tin-lead solder. The starting material was cassiterite, the only tin ore that occurs naturally in sufficient quantities for metallurgical processing. Cassiterite, an oxide of tin (SnO2), is dark brown to black in colour, has a high density (6800-7100 kg m-3) and is very hard (6-7), characteristics which must have immediately attracted attention when ores were being so…

[German version] I. Ancient Orient In Middle Eastern archaeology intarsia is the term for the laying of decorative elements of different materials onto or into a substratum. To achieve better colour contrasts, combinations of different materials, especially coloured stones, shells, bones, ivory, metals, ceramics, glass and silicate were used; the most common substrata were stone, metal, wood and clay/ceramics. The binder was usually bitumen. The oldest examples of intarsia were found in the preceramic Neolithic of Palestine ( c. 8000 BC; e.g. gypsum-coated human skulls wi…

[German version] I. Middle East Elektron as a natural alloy of gold and silver that was mostly worked as found in the Middle East and Egypt. According to analysis, objects seemingly consisting of gold usually contain a large amount of silver, which may constitute more than 40% (e.g., vessels from the royal graves of Ur, c. 2600 BC). Later, elektron was also artificially produced as an alloy. Elektron is harder than gold and, therefore, was preferred for jewellery, display weapons, statues, plating, inlays and units of value (e.g., as rings).  Gold;  Amber Wartke, Ralf-B. (Berlin) Bibliogr…

[German version] I. Ancient Near East and Egypt The tools of the Near Eastern cultures and Egypt comprised the most important types still used in similar designs and functions today. The use of natural objects as tools and their adaptation in order to improve their properties dates back to the Palaeolithic period (e.g. stone tools with various basic functions; increasing differentiation in relation to the qualities for particular usages). Improvements were made in handling (grip, mounting, shafts), the systematic exploitation of mechanical principles, e.g. axial mounting ( tournet…

[German version] I. Ancient Orient and Egypt The sickle is a classic harvesting tool with a largely unaltered basic form: a curved blade with its edge on the inside, made of wood, ceramic, copper/bronze or iron. The earliest evidence of sickles in Egypt and the Near East is from the 8th/7th millennia BC: flint or obsidian blades with traces of use on one side (bright 'polish') and remains of bitumen on the end with which the blades were fixed to the inner side of a curved piece of wood, less often to a…

(τορευτικὴ τέχνη/ toreutikḕ téchnē; Lat. caelatura; literally 'chiseling', from τορεύς/ toreús, Lat. caelum, 'chisel') denotes the chasing and repoussé work of thin plates of metal, or else works in which chasing is combined with repoussé work to design relief work; repoussé work may be replaced by casts. [German version] I. The Ancient Orient and Egypt Toreutics designates primarily the productive technique by which metals (gold/electrum, silver, copper/bronze, lead, iron) were shaped in a cold state. The objects (plaques), usually thin, were forme…

I. Ancient Near East [German version] A. Metal extraction Metals are extracted from ores (smelting). Precious metals: gold, silver, elektron; base metals: copper, tin, lead, iron. The beginnings of metallurgy can be found in mineralogically favourable regions, particularly near the (copper-)ore deposits of Anatolia. Elements of pyrotechnology have been identified in aceramic neolithic settlements of the early 7th millennium BC, in particular products of metallurgy based on the smelting of copper ore. The…

[German version] I. Definition of technology Technology describes the ensemble of tools, devices and procedures used for the acquisition and transformation of materials, the production and transportation of foodstuffs and consumables, the erection of structures, the provision of infrastructure, and the storage of information. The devices and procedures employed in different areas of technology are not independent of one another; rather, they constitute a technological complex with many interdependenci…

Wartke, Ralf-B. (Berlin) [German version] I. The Ancient Orient The winch, as a mechanical device for moving and lifting or lowering objects, is not attested archaeologically in Egypt nor in the Ancient Near East. However, its functional components, the spool with protruding crank arm (handspikes) for the application of muscle power (horizontal spool = reel, vertical spool = windlass), the pulley for transferring or diverting the applied force, the rope/hawser with the drum for winding and unwinding it, …

I. General [German version] A. Gold and gold deposits Gold is a soft precious metal that can be shaped well mechanically and so can be worked easily into sheets and wires, but it has a relatively high melting point at 1063°C that makes casting difficult. It is relatively rare in nature where it is present in the form of gold aggregates in solid rock from which it is extracted through mining methods, or it is present in the form of gold particles or grains in sandy deposits of weathered primary rock, from…

[German version] I. Ancient Orient In Egypt and the Near East, the history of the brick and its predecessor, the mud brick, dates back to the 8th/7th millennia BC. The raw material was generally a local mixture from clay/loam and sand/gravel, in Egypt the silt deposits of the Nile. The mixture, made lean through the addition of vegetal (chopped) straw, chaff, mineral (crushed stones or potsherds) or waste material (animal dung), was shaped into bricks in wooden frames. After drying out in the sun, th…

[German version] I. Ancient Orient and Egypt Pitch (also bitumen; asphalt) is a natural product of fossil origin and varying composition. Its use in the Ancient Orient mostly remained limited to the source regions in Mesopotamia, Ḫūzistān and the Dead Sea. Egypt did not have any noteworthy deposits of pitch, therefore pitch was irrelevant until the Ptolemaic period, and was then imported from Syria and Palestine as an agent for mummification (Mummies). Pitch, which is viscous, was rarely used unadulter…

[German version] (Sumerian iagin > Akkadian uqnû > Greek κύανος/ kýanos > Lat. cyanus; Egyptian ḫsbḏ). The blue rock is a complicated silicate related to the artificial ultramarine. It is characterized by its more or less deep blue colour, often with golden specks of iron pyrite. Lapis lazuli (LL) was extracted in what is present-day Afghanistan/province of Badaḫšān and in the Afghan-Pakistani borderland (Quetta), brought from there to the Near East and to Egypt via the Sinai. It was traded raw, separated from…

[German version] I. General The fossil resin of the conifers that gets its name in German ( Bernstein) from its combustibility or as a succinite. The magnetic power of attraction of amber was already known to Thales (A 1,24 and A 3 DK); from the Greek name ἤλεκτρον ( ḗlektron) the modern term ‘electricity’ is derived. Mentioned in Aristotle (e.g. Met. 4,10,388b19 ff.) and Theophrastus (H. plant. 9,18,2; Lapid. 3,16; 5,28 and 29 [2]), and as sucinum in Tacitus (Germ. 45). Pliny (Italian thium, German glaesum: HN 37,31-46) characterizes amber as defluens medulla pinei generis arboribus (‘t…

[German version] I. Definition and properties Pure copper is relatively rare in nature. Also, it quickly turns into secondary minerals through oxidation and therefore was hardly available as a usable material for early cultures. It was obtained through the smelting of copper ores. In metal form, copper can be processed and worked on in many ways. From early on, a large part of the processed copper was used to create alloys with  tin,  lead, and zinc, which are superior to pure copper in technical usab…

[German version] I. Middle East and Phoenicia Ivory, i.e. tusks of the boar, the hippopotamus and particularly the (African as well as Asian)  elephant, was extremely popular from the Neolithic period onwards as a material in ‘craftwork’. In the Bronze Age and the early Iron Age, the important workshops of the Syrian-Phoenician coastal towns and also of Egypt developed styles that were recognizably their own. Ivory carvings (IC) were widespread through intensive trade and almost always formed part of t…

[English version] I. Alter Orient und Ägypten P. (auch Bitumen; Asphalt) ist ein Naturprodukt fossiler Herkunft und unterschiedlicher Zusammensetzung, dessen Nutzung im Alten Orient weitgehend auf die Quellgebiete in Mesopot., Ḫūzistān und im Toten Meer beschränkt blieb. Äg. verfügte über keine nennenswerten Vorkommen von P.; es spielte dort bis in ptolem. Zeit keine Rolle und wurde dann als Mittel bei der Mumifizierung (Mumie) aus Syrien und Palaestina importiert. Das zähflüssige P. wurde selten natur…